Aleks Trousers
The Aleks is our best-selling model and the original style we launched the brand with. It boasts two inward-facing deep pleats and is cut to sit higher on the waist. The leg is generous, in a classic fit. This is the trouser for those looking for a beautiful, traditional trouser. Like all Kit Blake trousers, the trousers do not require a belt due to having side-adjusters. We recommend that these trousers are worn with a turn-up cuff, but it is up to the client’s preference. Note all of the trousers come unfinished to have them altered to your desired length.
If you are in-between sizes, we would recommend going up a size and pulling the adjusters in a little closer as needed.
| UK /US size | 30 | 32 | 34 | 36 | 38 | 40 |
| Italian size | 46 | 48 | 50 | 52 | 54 | 56 |
| Waist | 82 | 86 | 90 | 93 | 98 | 103 |
| Front Rise | 29.5 | 30 | 30.5 | 31 | 31.5 | 32 |
| Back Rise | 46.9 | 47.6 | 48.3 | 48.5 | 49.2 | 49.9 |
| Seat Width | 56.25 | 57.5 | 58.75 | 60 | 61.2 | 62.4 |
| Thigh (2.5cm below fork) | 34 | 35 | 36 | 37 | 38 | 39 |
| Knee Width (35cm below crotch) | 27.25 | 27.5 | 27.75 | 28 | 28.25 | 28.5 |
| Hem (half width) | 22.3 | 22.5 | 22.8 | 23 | 23.3 | 23.5 |
| Inside leg (unfinished) | 96 | 96 | 96 | 96 | 96 | 96 |
Grant Trousers
The Grant (previously called Slim Aleks) are based on our Aleks style. They have a similarly generous fit, with a high rise and two inward-facing deep pleats, but they have a more pronounced taper from the knee down. Unless you have very athletic thighs and calves, you will wear the same size as the Aleks. Like all Kit Blake trousers, the trousers do not require a belt due to having side-adjusters. We recommend that these trousers are worn with a turn-up cuff, but it is up to the client’s preference. Note all of the trousers come unfinished to have them altered to your desired length. If you are in-between sizes, we would recommend going up a size and pulling the adjusters in a little closer as needed.
If you are in-between sizes, we would recommend going up a size and pulling the adjusters in a little closer if needed.
| UK /US size | 30 | 32 | 34 | 36 | 38 | 40 |
| Italian size | 46 | 48 | 50 | 52 | 54 | 56 |
| Waist | 82 | 86 | 90 | 93 | 98 | 103 |
| Front Rise | 29.5 | 30 | 30.5 | 31 | 31.5 | 32 |
| Back Rise | 46.9 | 47.6 | 48.3 | 48.5 | 49.2 | 49.9 |
| Seat Width | 56.3 | 57.5 | 58.8 | 60 | 61.2 | 62.4 |
| Thigh (2.5cm below fork) | 34 | 35 | 36 | 37 | 38 | 39 |
| Knee Width (35cm below crotch) | 27 | 27.5 | 27.5 | 28 | 28 | 29 |
| Hem (half width) | 20 | 20 | 20.25 | 20.5 | 20.75 | 21 |
| Inside leg (unfinished) | 96 | 96 | 96 | 96 | 96 | 96 |
Duke Trousers
The Duke is our single-pleated model that was introduced due to customer demand. This model is ideal for conservative business environments or nervous / first-time pleat wearers. The single pleat is a outward-facing pleat and the fit is similar to our Grant style, although the single pleat means there is slightly less volume in the front of the trouser. Like all Kit Blake trousers, the trousers do not require a belt due to having side-adjusters. We recommend that these trousers are worn with a turn-up cuff, but it is up to the client’s preference. Note all of the trousers come unfinished to have them altered to your desired length. If you are in-between sizes, we would recommend going up a size and pulling the adjusters in a little closer as needed.
If you are in-between sizes, we would recommend going up a size and pulling the adjusters in a little closer if needed.
| UK /US size | 30 | 32 | 34 | 36 | 38 | 40 |
| Italian size | 46 | 48 | 50 | 52 | 54 | 56 |
| Waist | 82 | 86 | 90 | 93 | 98 | 103 |
| Front Rise | 28.75 | 29.25 | 29.75 | 30.25 | 30.75 | 31.25 |
| Back Rise | 45.6 | 46.3 | 47 | 47.7 | 48.4 | 49.1 |
| Seat Width | 56.25 | 57.50 | 58.75 | 60 | 61.25 | 62.25 |
| Thigh (2.5cm below fork) | 34 | 35 | 36 | 37 | 38 | 38 |
| Knee Width (35cm below crotch) | 25.5 | 25.75 | 26 | 26.25 | 26.5 | 26.75 |
| Hem (half width) | 21 | 21.25 | 21.50 | 21.75 | 22 | 22 |
| Inside leg (unfinished) | 96 | 96 | 96 | 96 | 96 | 96 |
Delon Trousers
Our new Delon style is based on our Duke trousers, but slimmer throughout the leg. It also features a single pleat, and is ideal for people who like pleated trousers, but prefer leaner trousers than our Aleks, Grant and Duke styles. The fit is slim throughout the whole leg.
If you are in-between sizes, we would recommend going up a size and pulling the adjusters in a little closer if needed.
| UK /US size | 30 | 32 | 34 | 36 | 38 | 40 |
| Italian size | 46 | 48 | 50 | 52 | 54 | 56 |
| Waist | 82 | 86 | 90 | 93 | 98 | 103 |
| Front Rise | 28.5 | 29 | 29.5 | 30 | 30.5 | 31 |
| Back Rise | 46 | 46.5 | 47 | 47.5 | 48 | 48.5 |
| Seat Width | 54 | 56 | 58 | 60 | 62 | 64 |
| Thigh (2.5cm below fork) | 33 | 34 | 35 | 36 | 37 | 38 |
| Knee Width (35cm below crotch) | 23.5 | 23.75 | 24 | 24.25 | 24.5 | 25.75 |
| Hem (half width) | 18 | 18.5 | 19 | 19.5 | 20 | 20.5 |
| Inside leg (unfinished) | 96 | 96 | 96 | 96 | 96 | 96 |
Windsor Shorts
The Windsor (formerly Short Aleks) are our double-pleated tailored shorts. They have an 8” in-seam and are finished with 1 5/8” cuffs. They are never lined nor do they have brace buttons.
If you are in-between sizes, we would recommend going up a size and pulling the adjusters in a little closer if needed.
| UK /US size | 28 | 30 | 32 | 34 | 36 | 38 | 40 |
| Italian size | 44 | 46 | 48 | 50 | 52 | 54 | 56 |
| Full Waist | 73 | 78 | 83 | 88 | 93 | 98 | 103 |
| Front Rise | 29 | 29.5 | 30 | 30.5 | 31 | 31.5 | 32 |
| Back Rise | 46.2 | 46.9 | 47.6 | 48.3 | 48.5 | 49.2 | 49.9 |
| Seat Width | 55 | 56.25 | 57.5 | 58.75 | 60 | 61.2 | 62.4 |
| Hem (half-width) | 26.5 | 26.75 | 27 | 28 | 28.25 | 28.5 | 28.75 |
| Finished inside leg with 4cm cuff | 23 | 23 | 23 | 23 | 23 | 23 | 23 |
Alterations
Tapering trousers is not a difficult or particularly expensive alteration and as all our trousers are supplied unhemmed, you can always ask your tailor to narrow the hem to suit your taste when having them finished. We are often asked how our trousers should be hemmed and there are many options to choose from but we always recommend a 2” cuff.
